top of page


Público·13 miembros
Christ Tresor Kouadio
Christ Tresor Kouadio

Epson Pm 245 Service Required Software Free Download 1

Epson Pm 245 Service Required Software Free Download 1

If you own an Epson PictureMate PM245 printer, you may encounter a message that says "Service Required" on the LCD screen. This message indicates that the printer's waste ink pads are nearing or have reached their end of service life. The waste ink pads are parts that absorb excess ink during the printing process. When they are full, they need to be replaced or reset to avoid ink leakage and damage to the printer.


There are two ways to solve this problem: either replace the waste ink pads or reset them using a software tool. Replacing the waste ink pads requires you to take the printer to an authorized service center, which may be costly and time-consuming. Resetting the waste ink pads using a software tool is a cheaper and faster option, but it also has some risks. You need to download and install the correct software tool for your printer model, and follow the instructions carefully. If you use the wrong software tool or make a mistake during the process, you may damage your printer or void its warranty.

One of the software tools that can reset the waste ink pads of Epson PictureMate PM245 is called Maintenance Reset Utility. This utility is available for download from Epson's official website. You can download the Maintenance Reset Utility if you receive the following message: "A printer's ink pad is at the end of its service life. Please contact Epson Support." By downloading from this website, you are agreeing to abide by the terms and conditions of Epson's Software License Agreement. You also need to have a Windows computer and a USB cable to connect your printer to your computer.

To use the Maintenance Reset Utility, follow these steps:

  • Download the utility from Epson's website and save it on your computer.

  • Run the utility and accept the license agreement.

  • Select your printer model and click OK.

  • Connect your printer to your computer using a USB cable and turn it on.

  • Click Particular Adjustment Mode.

  • Select Waste Ink Pad Counter and click OK.

  • Check the Main Pad Counter box and click Check.

  • The utility will show you the current value of the waste ink pad counter. If it is more than 100%, click Initialization.

  • The utility will reset the waste ink pad counter to zero. Click Finish when done.

  • Turn off your printer and disconnect it from your computer.

  • Turn on your printer and check if the "Service Required" message is gone.

Congratulations! You have successfully reset the waste ink pads of your Epson PictureMate PM245 printer using the Maintenance Reset Utility. You can now resume printing without any problems. However, keep in mind that resetting the waste ink pads does not mean that they are empty. They may still be full of ink and need to be replaced eventually. You should monitor the waste ink pad counter regularly and replace the waste ink pads when necessary. You can also use other software tools to reset the waste ink pads of your Epson PictureMate PM245 printer, such as [Epson Pm 245 Service Required Software Free Download 1], but be careful to use them at your own risk.

Acerca de

¡Bienvenido al grupo! Puedes conectarte con otros miembros, ...


  • Genevieve Cleopatra
    Genevieve Cleopatra
  • Phoenix Grace
    Phoenix Grace
  • Lokawra Shiopa
    Lokawra Shiopa
  • bucher bestseller
    bucher bestseller
bottom of page